Welcome to our Help Centre


How do I change the rollers on the Medium Duty Ring stretcher?

To change the rollers on the ring stretcher, you will need to:
  • Match the shank width of the ring to one of the rollers in the box
  • Fix the matching roller to stretcher by removing the pin on the U section at the end of the handle. To do this, pull upwards
  • Remove the roller that is already there and replace the roller that matched the shank of your ring and replace the pin
  • Inset shank of ring between the two rollers and move handle from side to side to stretch the metal.
Please note:
  • Only the back of the shank should be worked on (only to be used on gem set rings)
  • Rings should not be stretched more than two sizes and only if the shank is thick enough